Our Used Cubicles are Eco-reconditioned

We take as-is workstations, inventory them, and work with you to fit your specific need.  We use environmentally conscious processes to professionally clean every surface, touch-up where we can, add storage rails and make sure that you have working keys and locks.  We believe in setting realistic expectations.  Although we do our best to remove any dings, scratches, blemishes in stains, this is still pre-owned office furniture.  Size and finish selection is limited to the inventories available for purchase and some use may be evident. 

If you still have questions about workstations check out our used cubicle tip sheet.  Our used cubicle inventory is always changing so please use the request for quote section below or contact us to get a complete listing of our currently available workstations.

Narrow Your Results

Manufacturer

Series

Size

Availability

Quantity Available

Showing items per page Sorting by

Additional photos available

W3172 — Herman Miller Ethospace Cubicles

These Herman Miller Ethospace cubicles measure 8' x 6' and the panels are 47" tall.  The exterior of the panels are Maple Veneer, and the cubicles are powered.  Each workstation consists of:

  • 24" x 72" worksurface Maple Veneer
  • 24" x 54" worksurface Maple Veneer
  •  B/B/F pedestal
  • 18" x 47" x 24"d storage cabinet

We have (3) pods of (4) .

Manufacturer: Herman Miller
Series: Ethospace
Size: 8x6
Quantity Available: 12



Additional photos available

W3500 — Herman Miller AO3 Used Cubicles

These AO3 cubicles measure 8' x 6' and the panels are 48" tall with Cherry Wood top caps.  They are powered down the spline.  Each workstation is comprised of:

  • (2) 24" x 48" x 72" x 30" extended corner worksurface
  • B/B/F pedestal
  • 36" two drawer lateral file

Please note that the wood panels shown in the photograph are only along the aisle.

Manufacturer: Herman Miller
Series: AO3
Size: 8x6
Quantity Available: 10



Additional photos available

W3901 — Haworth Premise Cubes

These Haworth Premise workstations measure 10 1/2' x 7 1/2', the panels are 64" tall on the spline and one wing and 32" on the other wing.  The panels are powered on the spline.  Each cubicle consists of:

  • 30" x 60" bullet worksurface
  • 24" x 24" worksurface
  • 36" x 36" corner worksurface
  • 24" x 54" worksurface
  • 36" two drawer lateral file
  • B/B/F pedestal
  • mobile B/F pedestal
  • 54" overhead storage bin
  • 36" shelf

Please note, the photo shows these cubicles with lower panels but this listing is for tall cubicles with a shelf and bin included in the workstation.

Manufacturer: Haworth
Series: Premise
Size: Other
Quantity Available: 9


Steelcase Cubicles
Additional photos available

W3884 — Steelcase Answer Workstations

These Steelcase Answer workstations measure 6' x 7' and are powered down the spline with 2+2 power.  The paint is Steelcase finish code 4743, Mineral Metallic.  Each cubicle consists of:

  • 24" x 66" main worksurface
  • 24" x 60" return
  • 48" binder bin
  • (2) F/F pedestals
  • 24" x 6" x 52" storage tower

These cubicles were originally configured in (2) pods of twelve, (3) pods of four, (2) runs of two, a run of three and (2) singles.

Manufacturer: Steelcase
Series: Answer
Size: 6x7
Quantity Available: 9



Additional photos available

W3900 — Haworth Executive Workstations

These Haworth Premise workstations measure 10 1/2' x 7 1/2', the panels are 48" tall on the spline and one wing and 32" on the other wing.  The panels are powered on the spline.  Each cubicle consists of:

  • 30" x 60" bullet worksurface
  • 24" x 24" worksurface
  • 36" x 36" corner worksurface
  • 24" x 54" worksurface
  • 36" two drawer lateral file
  • B/B/F pedestal
  • mobile B/F pedestal

Manufacturer: Haworth
Series: Premise
Size: Other
Quantity Available: 8



Additional photos available

W3923 — Haworth Workstations

These Haworth Premise workstations measure 6 1/2' x 7 1/2', the panels are 64" tall along the spline and wing down to 48".  Each cubicle consists of:

  • 18" x 42" worksurface
  • 18" x 24" worksurface
  • 24" x 42" worksurface
  • 36" x 36" corner worksurface
  • 24" x 30" worksurface
  • 24" storage kiosk which contains a coat closet, a F/F pedestal and a closed door bookcase
  • F/F pedestal
  • 42" overhead storage bin
  • 36" shelf

 

Manufacturer: Haworth
Series: Premise
Quantity Available: 5


Steelcase Cubicles
Additional photos available

W3877A — Steelcase Montage Used Cubicles

These Steelcase Montage cubicles measure 8' x 7 1/2', the panels are 45" tall and the bin measures 65" tall.  Please note that the panel with the bin is not stackable and cannot be removed or replaced in these cubicles.  The glass measures 12" on the top of the panel.  They are powered on the spline with 8 wire 2+2 power.  Each workstation is comprised of:

  • (2) 24" x 54" worksurfaces
  • 24" x 36" x 36" x 30" handed corner
  • 30" x 36" x 36" x 24" handed corner
  • 30" x 24" worksurface
  • B/B/F pedestal
  • 36" two drawer lateral file
  • 36" overhead storage bin 

The paint is Steelcase finish code 4799, Metallic Platinum.  The veneer is Steelcase finish code 3522, Clear Maple.  

Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 5



Additional photos available

W3914 — Herman Miller Etho Cubes

These Herman Miller Ethospace workstations measure 7' x 6'.  The panels are 38" tall and powered onthe spline.  Each workstation consists of:

  • 24" x 66" primary worksurface with a cheater corner
  • 24" x 72" return
  • 24" B/B/F pedestal
  • 42" binder bin
  • 42" shelf

The fabric is a mix between Herman Miller finish code 2m06 and 2m03, a close up of the finishes is shown in second, third and fourth photographs.  The workstations were originally configured in a pod of four.

Manufacturer: Herman Miller
Series: Ethospace
Size: 7x6
Quantity Available: 4



Additional photos available

W3882 — Steelcase Montage Workstations

These Steelcase Montage cubicles measure 6' x 7 1/2', the panels are 38" tall.  They must be sold in (1) pod of four.  The panels are powered on the spline with 8 wire 2+2 power.  Each workstation is comprised of:

  • 24" x 54" worksurfaces
  • 30" x 36" x 36" x 24" handed corner
  • 30" x 36" worksurface
  • B/B/F pedestal
  • 36" two drawer lateral file

The paint is Steelcase finish code 4799, Metallic Platinum.  The veneer is Steelcase finish code 3522, Clear Maple. 

Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 4


 

Locations

Charlotte, NC
P (704) 521-9328
F (888) 268-2120

Chicago, IL
Michigan City, IN 46360
P (219) 879-3665
F (219) 872-7665

Holyoke, MA
56 Canal Street
Holyoke, MA, 01040
P (413) 315-6777
F (413) 315-6278

New York, NY
80 Wall Street
Suite 814
New York, NY 10005
P (212) 871-0055
F (212) 871-0082

Philadelphia, PA
P (856) 786-2229
F (856) 786-2011