Our Used Cubicles are Eco-reconditioned

We take as-is workstations, inventory them, and work with you to fit your specific need.  We use environmentally conscious processes to professionally clean every surface, touch-up where we can, add storage rails and make sure that you have working keys and locks.  We believe in setting realistic expectations.  Although we do our best to remove any dings, scratches, blemishes in stains, this is still pre-owned office furniture.  Size and finish selection is limited to the inventories available for purchase and some use may be evident. 

If you still have questions about workstations check out our used cubicle tip sheet.  Our used cubicle inventory is always changing so please use the request for quote section below or contact us to get a complete listing of our currently available workstations.

Narrow Your Results

Manufacturer

Series

Size

Availability

Quantity Available

Showing items per page Sorting by

Additional photos available

W4047A — Knoll Reff Workstations

These Knoll Reff cubes measure 6' x 8', the panels are 64" tall along the spline winging down to 49" along the aisle.  The panels are powered with 8 wire power along the spline.  Each workstation consists of:

  • (1) 48" corner worksurface
  • (1) 24" x 48" worksurface
  • (1) 24" x 24' worksurface
  • B/B/F pedestal
  • 30" two drawer lateral file
  • 48" reuter bin

The panels are veneer along the aisle and fabric on the interior.  Please note that this is a stackable system and the tall panels along the spline can be adjusted to shorter height if you remove a stacker.  The mobile pedestal with the red fabric top shown in the photographs are not included but are available if additional storage is needed.

Manufacturer: Knoll
Series: Reff
Size: 6x8
Quantity Available: 145


Haworth Workstations
Additional photos available

W3977 — Haworth Premise Cubicles

These Haworth Premise V1 workstations measure 6' x 7', the panels are powered with 8 wire power on the spline and first wing panel.  Each workstation consists of:

  • 30" x 72" worksurface
  • 24" x 54" wing worksurface
  • (2) 36" overhead bins
  • B/B/F pedestal
  • F/F pedestal

The paint on these cubes is Haworth TR-S, Sand.  The laminate is also Haworth Sand.  The fabric is Haworth finish code FL-AJ on the spline and SF-AA on the wing panels.

Manufacturer: Haworth
Series: Premise
Size: 6x7
Quantity Available: 100



Additional photos available

W3850 — Herman Miller Ethospace Cubicles

These Herman Miller Ethospace cubicles measure 6' x 6', the panels are 46" tall and powered with beltline power.  Each workstation consists of:

  • (1) 24" x 36" corner
  • (2) 24" x 36" wings
  • (1) BBF ped
  • (1) FF ped

The top caps and finished ends are Cherry.  Please note that there are no aisle panels.  All product was originally configured in "bullpens" with the majority consisting of (8) workstations.

Manufacturer: Herman Miller
Series: Ethospace
Size: 6x6
Quantity Available: 82



Additional photos available

W3913 — Herman Miller Ethospace Cubes

These Herman Miller Ethospace workstations measure 3' x 5 1/2', the panels are 38" tall and powered on the spline with 8 wire 4 circuit.  Each workstations consists of:

  • 36" x 66" worksurface
  • 20" "V" Style free standing B/B/F pedestal

The fabric on the interior of the panels is Herman Miller finish code 2M06, Silkworm Jasmine.  The fabric on the exterior of the panels is 2M06, Silkworm Saffron.  The trim is Cherry wood and the laminate is 1X, Vanilla Fiber.  These cubes were originally configured in (11) pods of six, (5) pods of eight, and (1) run of three.  Please note that these workstations come with a mix of power poles and BPI's, this is illustrated in the sixth photograph.

 

 

 

Manufacturer: Herman Miller
Series: Ethospace
Size: Telemarketing
Quantity Available: 78



Additional photos available

w3624 — Innovant Maple Veneer Workstations

These innovant benching stations are double stations.  The wing panels are 41 3/4" tall without the glass stackers and 49" tall with the glass.   Each seat consists of:

  • 30" x 78" mains surface which is made up of  (1)18" x 78" surface, (3) 8" x 25 3/4" bread boards and (1) 4" x 78" metal trough
  • 15 1/2" B/B/F pedestal
  • 30" two drawer lateral file with a 18" x 30" attached top
  • 20" two shelf bookcase which is attached to the file, please note that this has no top, it sits under the main surface

Please note that the monitor arms are available for an additional charge.

 

Manufacturer: Innovant
Quantity Available: 64


Knoll Workstations
Additional photos available

W3976 — Knoll Morrison Workstations

These Knoll Morrison used cubes measure 8' x 6', the panels are 42" tall and have a 16" stacker.  These workstations can be purchased with or without the stacker so they could be 42" tall, wing down from 58" to 42" or you could purchase stackers for the entire cube.  The panels are powered on the spline.  Each workstations consists of:

  • 48" x 72" extended corner worksurface
  • 24" x 48" return worksurface
  • 30" x 48" return worksurface
  • two drawer lateral file
  • B/B/F pedestal

The top caps and worksurfaces are Cherry Veneer.  The fabric code is Knoll W2801.

Manufacturer: Knoll
Series: Morrison
Size: 8x6
Quantity Available: 62


Steelcase Cubes
Additional photos available

W4040 — Steelcase Avenir Workstations

These Steelcase Avenir workstations measure 5 1/2' x 6', the panels are 42" tall and powered on the spline.  Please note that the topcaps are Avenir low profile.  This product has been remanufactured.  Each workstation consists of:

  • 30" x 72" worksurface
  • 24" x 36" return worksurface
  • 30" B/B/F pedestal

Manufacturer: Steelcase
Series: Avenir
Size: Other
Quantity Available: 47


Steelcase Workstations
Additional photos available

W3741A — Steelcase Montage Workstations

These Steelcase Montage cubicles measure 7' x 5' with power down the spline and first panel.  The height of the panels as shown are 75" on the spline and first panel, then winging down.  Please note that these panels are comprised of both 10" and 20" stackers so the height could be adjusted to  45" tall.  Each station consists of: MUST BE SOLD IN PODS.

  • 48" x 60" extended corner
  • (1) 24" x 36" wing worksurfaces
  • 48" overhead bin
  • 36" overhead bin
  • B/B/F pedestal
  • F/F pedestal

The worksurfaces included with these workstations are Elective Elements worksurfaces.  The laminate is Steelcase 2850, Vanadium Fiber.  The paint is Steelcase 4788, Gold Dust.  Lastly, the fabric is Steelcase G001, Fresco Sandrift.

 

 

Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 43


Steelcase Cubes
Additional photos available

W4017 — Steelcase Montage Cubes

These Steelcase Montage workstations measure 5 1/2' x 7 1/2', the panels are 45" tall.  The cubes are powered with beltline power.  Each workstation consists of:

  • 24" x 42" corner worksurface
  • 24" x 24" wing worksurface
  • 24" x 48" wing worksurface
  • B/B/F pedestal
  • 30" two drawer lateral file

The paint is Gold Dust and the trim and topcats are wood.  They were originally configured in (7) pods of 6.

Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 42


 

Locations

Charlotte, NC
P (704) 521-9328
F (888) 268-2120

Chicago, IL
Michigan City, IN 46360
P (219) 879-3665
F (219) 872-7665

Holyoke, MA
56 Canal Street
Holyoke, MA, 01040
P (413) 315-6777
F (413) 315-6278

New York, NY
80 Wall Street
Suite 814
New York, NY 10005
P (212) 871-0055
F (212) 871-0082

Philadelphia, PA
P (856) 786-2229
F (856) 786-2011