Our Used Cubicles are Eco-reconditioned

We take as-is workstations, inventory them, and work with you to fit your specific need.  We use environmentally conscious processes to professionally clean every surface, touch-up where we can, add storage rails and make sure that you have working keys and locks.  We believe in setting realistic expectations.  Although we do our best to remove any dings, scratches, blemishes in stains, this is still pre-owned office furniture.  Size and finish selection is limited to the inventories available for purchase and some use may be evident. 

If you still have questions about workstations check out our used cubicle tip sheet.  Our used cubicle inventory is always changing so please use the request for quote section below or contact us to get a complete listing of our currently available workstations.

Narrow Your Results

Manufacturer

Series

Size

Availability

Quantity Available

Showing items per page Sorting by

Additional photos available

W3288 — Unifor Veneer Workstations

These Unifor workstations measure 6' 2" x 7' 4", the panels are 50" tall.  Each workstations is powered down the spline.  Each cubicle consists of:

  • 24" x 71" worksurface
  • 24" x 35" worksurface
  • 24" storage tower with attached closet
  • B/B/F pedestal
  • monitor arm
  • Ceiling infeeds for power input

Please note that there are (4) pods of (4) available.  Also, we are not able to provide keys for the locks on this product.

Manufacturer: Unifor
Size: 7x8
Quantity Available: 9



Additional photos available

W3630 — Innovant Maple Veneer Cubicles

These innovant cubicles measure 6 1/2" x 5", the panels are 50" with a 7" glass stacker.  The panels are non-powered.  The workstations were originally configured in (2) runs of two and a pod of four.  Each cubicle consists of:

  • 78" x 29" worksurface
  • 30" x 20" two drawer lateral with a top
  • B/B/F pedestal

Manufacturer: Innovant
Size: Other
Quantity Available: 8


W3426 — Knoll Workstations

These Knoll workstations a simple and would work well in an area along a wall where you need to add a few more workstations.  There are no spline panels the aisle panels are wall mounted.  Each stations consists of:

  • 90" x 30" worksurface
  • B/F pedestal
  • (2) 30" binder bins
  • 30" shelf
  • task light

Please note that these workstations are not powered. Finishes: Wood top caps, tiles and end trim: Beech on Beech, Paint: Metallic Silver, Worksurfaces: Lt Grey laminate #1500, Lateral and Combo File: Oyster Grey laminate, Mobile BF: Slate Grey laminate

Manufacturer: Knoll
Series: Reff
Size: Telemarketing
Quantity Available: 7


Steelcase Cubicles
Additional photos available

W3877 — Steelcase Montage Used Cubicles

These Steelcase Montage cubicles measure 8' x 7 1/2', the panels are 45" tall and the bin measures 65" tall.  Please note that the panel with the bin is not stackable and cannot be removed or replaced in these cubicles.  The glass measures 12" on the top of the panel.  They are powered on the spline with 8 wire 2+2 power.  Each workstation is comprised of:

  • (2) 24" x 54" worksurfaces
  • 24" x 36" x 36" x 30" handed corner
  • 30" x 36" x 36" x 24" handed corner
  • 30" x 24" worksurface
  • B/B/F pedestal
  • 36" two drawer lateral file
  • 36" overhead storage bin 

The paint is Steelcase finish code 4799, Metallic Platinum.  The veneer is Steelcase finish code 3522, Clear Maple.  

Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 6


Knoll Workstations

W3866 — Knoll Used Cubes

These Knoll cubicles have Reff panels with Autostrata components, the cubicle measures 6 1/2' x 7'.  The panels are 65" tall along the spline winging down to 54".  The panels are powered on the spline.  Each workstation is comprised of:

  • 24" x 78" worksurface
  • 30" x 72" worksurface
  • B/B/F pedestal
  • 36" calibre two drawer lateral file
  • 42" overhead storage bin
  • 36" overhead storage bin

These cubicles were originally configured in runs of 2.

Manufacturer: Knoll
Series: Reff and Autostrata
Quantity Available: 6



Additional photos available

W3882 — Steelcase Montage Workstations

These Steelcase Montage cubicles measure 6' x 7 1/2', the panels are 38" tall.  They must be sold in (1) pod of four.  The panels are powered on the spline with 8 wire 2+2 power.  Each workstation is comprised of:

  • 24" x 54" worksurfaces
  • 30" x 36" x 36" x 24" handed corner
  • 30" x 36" worksurface
  • B/B/F pedestal
  • 36" two drawer lateral file

The paint is Steelcase finish code 4799, Metallic Platinum.  The veneer is Steelcase finish code 3522, Clear Maple. 

Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 4



Additional photos available

W3729 — Knoll Workstations

These Knoll Reff workstations measure 6" x 8", the panels are 64" tall.  They are powered down the spline with baseline and beltline power.  Each cubicle consists of:

  • 20" x 36" x 42" x 20" corner worksurface
  • 20" x 36" worksurface 
  • 20" x 60" worksurface 
  • 18" B/B/F pedestal
  • 30" two drawer lateral file
  • (2) 36" overhead bins

Please note that these workstations are configured in (2) pods of four.

Manufacturer: Knoll
Series: Reff
Size: 6x8
Quantity Available: 4


 

Locations

Charlotte, NC
P (704) 521-9328
F (888) 268-2120

Chicago, IL
Michigan City, IN 46360
P (219) 879-3665
F (219) 872-7665

Holyoke, MA
56 Canal Street
Holyoke, MA, 01040
P (413) 315-6777
F (413) 315-6278

New York, NY
80 Wall Street
Suite 814
New York, NY 10005
P (212) 871-0055
F (212) 871-0082

Philadelphia, PA
P (856) 786-2229
F (856) 786-2011